CBB25 (K6M) 点火器专用金属化聚丙烯薄膜电容器
■General Technical Characteristics 一般特性
Metallized polypropylene film
金属化聚丙烯膜
Small volume with good self-healing property
体积小，有良好自愈性能
Low dissipation at high frequency, low temperature rise
高频损耗小，温升低
High voltage resistance, excellent ability to withstand charging-discharging process
耐电压高，承受充放电能力强，瞬间较高过电流能力强
■General Technical Characteristics 一般特性
Epoxy resin sealing, excellent flame retardant and moisture proof
阻燃环氧树脂，符合UL94 V-0
■Electrical Characteristics 电气特性
Reference standard 引用标准: GB/T 10190 (IEC60384-2)
Climatic Category 气候类别: 40/110/56
Operating Temperature Range: -40°C ~ 110°C
工作温度范围: (+85°C to +110°C: decreasing factor 1.25% per °C for UR)
Rated Voltage 额定电压: 250VDC, 400VDC, 450VDC, 630VDC, 1000VDC
Capacitance Range 电容量范围: 0.47µF ~ 2.2µF
Capacitance Tolerance 电容量偏差: ±5% (J), ±10%(K)
Dissipation factor 损耗角正切: ≤10x10-4 Measured at 1KHz and 20°C.
Test Voltage 耐电压: 1.6UR for 5 sec.
Insulation resistance 绝缘电阻: ≥30000MΩ CR≤ 0.33 µF; ≥1000S, CR>0.33 µF. Measured at 20°C, 100V and 1 min.
■Electrical Specification & Part Numbers Reference 规格型号参考 Unit: mm (max)
Cap
(μF) | 450VDC(250VAC) | Part Number | |||
W | H | T | d | ||
0.47 | 18.0 | 10 | 5.5 | 15.0 | K6M2S474********* |
0.56 | 18.0 | 11 | 6.0 | 15.0 | K6M2S564********* |
0.68 | 18.0 | 13 | 6.5 | 15.0 | K6M2S684********* |
0.82 | 18.0 | 14 | 7.0 | 15.0 | K6M2S824********* |
1.0 | 18.0 | 15 | 8.0 | 15.0 | K6M2S105********* |
0.68 | 23.0 | 12.5 | 7.5 | 20.0 | K6M2S684********* |
0.82 | 23.0 | 13.5 | 8.0 | 20.0 | K6M2S824********* |
1.0 | 23.0 | 15.5 | 8.5 | 20.0 | K6M2S105********* |
1.2 | 23.0 | 16.0 | 9.5 | 20.0 | K6M2S125********* |
1.5 | 23.0 | 17.5 | 11.0 | 20.0 | K6M2S155********* |
1.0 | 28.0 | 14.0 | 7.0 | 25.0 | K6M2S105********* |
1.2 | 28.0 | 15.0 | 8.0 | 25.0 | K6M2S125********* |
1.5 | 28.0 | 14.0 | 7.0 | 25.0 | K6M2S155********* |
1.8 | 28.0 | 15.0 | 8.0 | 25.0 | K6M2S185********* |
2.0 | 28.0 | 16.0 | 9.5 | 25.0 | K6M2S205********* |
2.2 | 28.0 | 16.5 | 10.0 | 25.0 | K6M2S225********* |
备注：1. “*********”= Capacitance tolerance code, Pitch, Lead form and packaging code, Lead form, Lead length, Internal code.
“*********”表示容量偏差，引线脚距，引线加工和包装代码，引线加工脚距，引线长度，内部编码。
2. Customization for special specification and requirement is available.
