■General Technical Characteristics 一般特性

Metallized polypropylene film/foil, wound construction

金属化聚丙烯膜箔式，卷绕结构

Low loss and small inherent temperature rise

损耗小，内部温升小

Negative temperature coefficient of capacitance

负电容器温度系数

Plastic case (UL94 V-0), epoxy resin sealing

塑胶外壳（UL94 V-0 ), 阻燃环氧填充

■Electrical Characteristics 电气特性

Reference Standard 引用标准:           GB/T 14579 (IEC60384-17)

Climatic Category 气候类别:             40/105/21

Rated Temperature 额定温度:           85°C

Operating Temperature Range:           -40°C ~ 105°C

工作温度范围:                          (+85°C to +105°C: decreasing factor 1.25% per °C for U_R)

Rated Voltage 额定电压:                1000V/1250V, 1600V, 2000V                     

Capacitance Range 电容量范围:         0.0010µF ~ 0.1µF

Capacitance Tolerance 电容量偏差:      ±3% (H), ±5%(J), ±10%(K),

Dissipation Factor 损耗角正切:           ≤10x10^-4 Measured at 1KHz and 20°C

                                      ≤20x10^-4 Measured at 1KHz and 20°C.

Test Voltage 耐电压:                   1.75U_R for 5 sec.

Insulation Resistance 绝缘电阻:        ≥100 000MΩ  Measured at 20°C, 100V and 1 min.   

Maximum Pulse Rise Time(dV/dt) 最大脉冲爬升速率:   

 If the working voltage (U) is lower than the rated voltage (U_R), the capacitor can be worked at a higher dV/dt. In this case, the maximum allowed dV/dt is obtain by multiplying the left value with U_R/U.

若实际工作电压U比额定电压 U_R低，电容器可工作在更高的dV/dt场合， 这样dV/dt允许值应为左表值乘以U_R/U.